banner
mengfq5@mail.sysu.edu.cn

孟凡強Associate Professor

Email：mengfq5@mail.sysu.edu.cn

Research Areas：(1)基于中子和同步輻射技術的核材料服役性能評價；(2)抗鉛鉍腐蝕、耐輻照金屬結構材料與先進制造工藝研發；(3)復雜多環境原位實驗裝置研制

個人資料

孟凡強 副教授，博士生導師

郵箱: mengfq5@mail.sysu.edu.cn   

電話：18666112390

教育經歷

2010-2013，筑波大學（日本），工學博士，材料科學與工程

2007-2009，東北大學，工學碩士，材料學

2003-2007，東北大學，工學學士，材料科學與工程

工作經歷

2019-至今，中山大學中法核工程與技術學院，百人引進副教授

2014-2019，美國能源部直屬埃姆斯國家實驗室（Ames National Laboratory），博士后研究員

2013-2014，日本國立材料研究機構（NIMS），博士后研究員

研究方向

基于中子和同步輻射技術的核材料服役性能評價；

抗鉛鉍腐蝕、耐輻照金屬結構材料與先進制造工藝研發；

適用于同步輻射多探測技術的多環境原位實驗裝置研制

科研項目

國家自然科學基金面上項目：《IN718合金應力誘導強化相變體選擇效應的多尺度研究》；負責人；2023.01-2026.12; 54萬；

國家重點研發計劃：《EUV在波長掩模檢測技術研究》；子課題負責人；2022.01-2026.12；125萬；

國家重點研發計劃：《高精度慣性傳感器地面測試方法研究》，子課題負責人；2020.12-2025.11；42萬；

廣東省重點領域研發計劃：《高性能鉛鉍快堆燃料組件數字化設計與制造工藝研發》；子課題負責人；2025.04-2028.04；100萬；

廣東省重點領域研發計劃：《一體化小型鉛鉍快堆關鍵技術研究及實驗驗證》；子課題負責人；2020-2025；50萬；

廣州市科技創新委：《FeCrAl合金的鉛鉍腐蝕機理研究》；202102020054；負責人；2021.04-2023.03；5萬；

松山湖材料實驗室重點課題：《基于中子/X射線散射技術的鐵鈦合金過冷熔體與晶化相結構關聯性研究》，負責人，2024.1-2025.12；20萬；

國家材料服役安全科學中心開放課題：《鉛基快堆用包殼材料腐蝕數據庫建立與本構模型》，負責人；2021.12-2023.12；10萬；

校企聯合橫向課題：《液態金屬環境材料疲勞性能檢測系統研制》，負責人，2024.1-2025.5；520萬；

校企聯合橫向課題：《GH4169合金特殊工況下長期服役組織性能演變研究》，負責人；2021.3-2022.12；107萬；

校企聯合橫向課題：《鉛鉍腐蝕樣品分析表征標準研究服務》負責人；2021.12-2022.12；48萬；

校企聯合橫向課題：《銻元素與包殼化學相互作用研究》，負責人，2024.05-2025.10；65萬；

校企聯合橫向課題:《GH4061合金粉末（PREP）激光熔融成型及性能檢測》，負責人，2024.10-2024.12，25萬元

校企聯合橫向課題:《高溫合金PREP粉末制備及其粉末床激光熔融成型》，負責人，2024.9-2025.12；35萬；

校企聯合橫向課題:《鎳基高溫合金輻照試驗》，負責人，2025.6-2025.9，47.7萬元

校企聯合橫向課題:《XXXX堵頭斷裂根本原因分析》，負責人，2025.9-2016.1, 123.8萬元

 

學術論文

第一作者、通訊作者

  1. Yinan Zhang, Zhou Zhou, Jin Huang, Guohua Xu, Yang Liu, Lei Wang, Fanqiang Meng*, Enhanced Precipitation in IN617 Induced by Ion Irradiation at Elevated Temperatures, Journal of Nuclear Materials, (2025)156143. https://doi.org/10.1016/j.jnucmat.2025.156143
  2. Jin Huang, Fangchen Liu, Hongwei Qi, Jiasheng Liu, Zhou Zhou, Guohua Xu, Xinbo He, Yang Liu, Lei Wang, Fanqiang Meng*；Promotion of compact coprecipitates by hot isostatic pressing in GH4061 prepared by laser powder bed fusion； Journal of Materials Research and Technology, 38(2025)1717-1723.
  3. Wenlong Liu, Chen Zhang, Yizhuo Zhang, Zhipeng Sun, Yaolin Zhao, Chenyang Lu, Tan Shi*, Fanqiang Meng*, Yuanming Li*; Energetic stability of small defect clusters in α-zirconium by first-principles calculation; Materials Letters, 398(2025)138958.
  4. Jiajian Shi,Fanqiang Meng*, Yuji Huang, Lili Xing, Zhiwei Wang, Qi Wang, Yingxue Chen, Jiming Lin, Feifei Zhang*；Effect of phase configuration on corrosion behavior of Fe-20Ni-15Cr-4.5Al alumina-forming austenitic steel in liquid lead-bismuth；Journal of Nuclear Materials, 2025, 614(2025)155888.
  5. Fangchen Liu, Jiajian Shi, Jin Huang, Guohua Xu, Qi Guo, Jian Xu, Fanqiang Meng*；Influence of secondary phases on the corrosion behavior of IN718 in high-temperature pressurized water； Corrosion Communication, 2025/03/20.
  6. Wei Chen, Zhichao Lu*, Chengzhe Wang, Xiaolong Li, Ming Yang, Guanhaojie Zheng, Yibo Zhang, Xuerui Wei, Yan Huang, Fan Zhang, Fanqiang Meng*, Zhou Zhou*, Dong Ma*；In-situ study of FeCoCrMoCBTm high entropy bulk metallic glasses with high thermal stability via high-energy synchrotron X-ray diffraction；Intermetallics, 180(2025)108706.
  7. Ziling Peng*, Chengzhe Wang, Jingyang Li, Dongbai Sun, Fanqiang Meng*, In-situ synchrotron X-ray diffraction study of the precipitates-matrix interaction in a selective laser melted Al-Mg-Sc-Zr alloy； Scripta Materialia, 260(2025)116596.
  8. Fangchen Liu, Fanqiang Meng*, Hanzhong Deng, Yang Liu, Lei Wang, Exploring the correlation between variants selection and applied stress in IN718 through transmission electron microscopic analysis, Journal of Materials Research and Technology, 2024, 33(2024)8958-8966。
  9. Yuji Huang, Fanqiang Meng*, Jiajian Shi, Lijun Zhang,Rui Yuan, Yingxue Chen, Feifei Zhang*, Crevice corrosion behavior of 316L austenitic steel in static liquid lead-bismuth eutectic at 550°C, Journal of Nuclear Materials, (2025) 155441.
  10. Yuji Huang, Sirui Peng, Zhihan Zhang, Jiajian Shi, Rui Yuan, Zhou Zhou, Yuchun Ji, Jiming Lin, Yingxue Chen, Feifei Zhang, Fanqiang Meng*;Corrosion Analysis of 316 L and T91 Steels Exposed to Liquid Lead-Bismuth Eutectic using X-ray CT, Materials Today Communications, 41(2024)110985.
  11. GQ Huang*, T Sun, FQ Meng*, XW Jiang, TH Chou*, J Ju, J Gan, T Yang, MS Li, ZK Shen, WT Hou, ZY Piao, S Mironov, XM Feng, YF Shen; Microstructural evolution and wear behavior of friction stir processed L12 strengthened AlFeCrCuNi-type high-entropy alloy; Materials Characterizations, 216(2024)114250.
  12. Jiajian Shi, Fanqiang Meng*, Guoqiang Huang, Fangchen Liu, Lihong Zhai, Yingxue Chen, Feifei Zhang, Jiming Lin, Lei Wang, Improving the oxidation resistance by forming continuous Al2O3 protective layer in alumina-forming austenitic stainless steel, Surface and Coating Technology, 493(2024) 131279.
  13. Tan Shi, Wenlong Liu, Chen Zhang, Sixin Lyu, Zhipeng Sun, Qing Peng, Yuanming Li, Fanqiang Meng*, Chuanbao Tang*, Chenyang Lu*, An investigation of self-interstitial diffusion in α-zirconium by an on-the-fly machine learning force field, AIP Advanced, 14(2024)055010.
  14. Fanqiang Meng*, Guoqiang Huang, Jiajian Shi, Dongbai Sun, Zhou Zhou*; The effect of minor Ti and Mn additions on the microstructure and mechanical properties of additive manufactured Al–Ce–Mg alloys; Journal of Materials Science, Volume 59, pages 2547–2557, (2024)
  15. Jiajian Shi, Yuji Huang, Yingxue Chen, Rui Yuan, Lijun Zhang, Feifei Zhang*, Fanqiang Meng*; Evaluating the dissolution corrosion resistance of Hastelloy exposed to liquid lead‐bismuth eutectic at 500℃; Materials and Corrosion; 75-6（2024）796-804.
  16. XM Zhang, X Zheng, XL Li, FQ Meng*, SS Yin; A method with ultra-high angular resolution for X-ray diffraction experiments; Journal of Synchrotron Radiation; 31(2024).35-41.
  17. GQ Huang, TH Chou, SF Liu, J Ju, J Gan, T Yang, XM Feng, YF Shen, JC Gao, MS Li, FQ Meng*；Effect of initial grain size on oxidation resistance of L12-strengthened Al-Fe-Cr-Cu-Ni high-entropy alloy at 900℃, Applied Surface Science, 652 (2024) 159285.
  18. Guo-hua XU, Ran DUAN, Lei WANG *, Yang LIU, Fan-qiang MENG*; Effect of compositional homogenization on hot workability of Ni-based GH4061 superalloy; Transactions of Nonferrous Metals Society of China; 33(2023)1792-1802.
  19. GQ Huang, TH Chou, SF Liu, B Xiao, J Ju, J Gan, T Yang*, P Zhang, JX Yang, CY Lu*, FQ Meng*，Unveiling the microstructure evolution and mechanical properties of submerged friction stir welded joint of fine-grained NiCoCr medium entropy alloy, Materials Characterization, 200 (2023) 112903. 
  20. Rui Yuan, Jiajian Shi, Jinxue Yang, Yingxue Chen, Guoqiang Huang, Chenyang Lu, Feifei Zhang, Fanqiang Meng*;Si segregation and relevant effect on the corrosion propagation of F/M steel exposed to liquid lead bismuth eutectic, Corrosion Engineering, Science and Technology, 57(2022)648-653.
  21. Guoqiang Huang, Jie Wu, Rui Yuan, Jinxue Yang, Fujun Cao, Abdelbaset RH Midawi, Wei Guan, Wentao Hou, Chenyang Lu, Adrian Gerlich, Yifu Shen, Fanqiang Meng*;Elucidating microstructural evolution and its effect on the mechanical properties of FSWed alumina-forming austenitic steel for power plant applications, Materials & Design, 184(2022)111684.
  22. GQ Huang, J. Wu, R. Yuan, Y. Li, F. Meng*, P Lei, C. Lu*, F. Cao, Y. Shen, High temperature oxidation behavior and mechanism of Al0.3CuCrFeNi2 high-entropy alloy with coherent gamma/gamma prime microstructure, Corrosion Science, 195(2022)109984.
  23. Hangzhong Deng, Lei Wang*, Yang Liu, Xiu Song, Fanqiang Meng*, Teng Yu, Fatigue crack propagation behavior of IN718 superalloy aged with temperature/stress coupled field, International Journal of Fatigue, 153(2021)106514.
  24. Han-zhong Deng, Lei Wang*, Yang Liu, Xiu Song, Fan-qiang Meng*, Shuo Huang;Evolution behavior of g” phase of IN718 superalloy in temperature/stress coupled field; International Journal of Minerals, Metallurgy and Materials 28(12)(2021)1949-1956; 
  25. Yingxi Li, Fanqiang Meng*, Rui Yuan, Guoqiang Huang, Dongbai Sun*; “Structural hierarchy during devitrification of Al-Ce amorphous ribbon investigated using in-situ high energy X-ray diffraction”, Acta Metallurgica Sinica, 2022, 35(1), 157-162.
  26. Fanqiang Meng*, Yang Sun*, Feng Zhang, Bo Da, Cai-Zhuang Wang, Matthew J. Kramer, Kai-Ming Ho, Dongbai Sun*; “Quenched-in local structures dictate phase and morphology selections during devitrification of metallic glass”; PhysicalReviewMaterials, 5(2021)043042.
  27. Fanqiang Meng*,Wenjie Wang, Matthew J. Kramer; “Monitoring eutectoid decomposition process of metastable phases in Al-Sm alloy via in-situ X-ray scattering and ex-situ transmission electron microscopy”, Materials Characterization, 170 (2020) 110665
  28. Fanqiang Meng*, Shaoyang Wang, Dongbai Sun*; “Investigation of relaxation behavior in highly rejuvenated bulk metallic glasses by in-situ synchrotron X-ray scattering”; Intermetallics, 121(2020)106764.
  29. FQ Meng, SH Zhou, RT Ott, MJ Kramer, RE Napolitano; “Competitive devitrification and metastable phase selection in amorphous Al-Sm”; Materialias, (2020); 9(2020)100595; 
  30. F. Meng*, K. Tsuchiya, M.J. Kramer, R.T. Ott. “Reduction of shear localization through structural rejuvenation in Zr-Cu-Al bulk metallic glass”; Materials Science and Engineering A, 765(2019) 138304.
  31. F. Meng*, R.P. Chaudhary*, K. Handha, I.C. Nlebedim, A. Palasyuk, E. Simsek, M.J. Kramer, R.T. Ott. “Rapid assessment of Ce-Co-Cu-Fe system for permanent magnetic applications”; JOM, 70, 872-878, 2018. (Front Cover)
  32. J. Patrick Coleman, Fanqiang Meng, Koichi Tsuchiya, James Beadsworth, Michael LeBlanc,Peter K. Liaw, Jonathan T. Uhl, Richard L. Weaver, and Karin A. Dahmen; (Co-first author); “The effect of annealing on nanoindentation slips in bulk metallic glass”;Physical Review B, 2017, 96, 134117(2017).
  33. Fanqiang Meng, Julian M. Rosalie, Alok Singh, Koichi Tsuchiya, “Precipitation behaviors in ultra-fine grained Mg-Zn alloys processed by high-pressure torsion”; Materials Science and Engineering A, 644(2015)386-391. 
  34. F.Q. Meng*, J. Geng, M.F. Besser, M.J. Kramer, R.T. Ott; “Glass transition in a marginal glass-forming alloy studied by dynamic mechanical analysis”;Journal of Applied Physics, 116, 223505(2014).
  35. Fanqiang Meng, Julian M. Rosalie, Alok Singh, Hidetoshi Somekawa, Koichi Tsuchiya; “Ultrafine grain formation in Mg-Zn alloy by in-situ precipitation during high pressure torsion”; Scripta Materialia, 78-79 (2014) 57-60.
  36. Fanqiang Meng*, Koichi, Tsuchiya, Yoshihiko Yokoyama; “Pronounced Structural Rejuvenation in Zr50Cu40Al10 Metallic Glass Strained by Torsional Straining at Elevated Temperature”, Materials Transaction, 55 (2014) pp. 220-222. 
  37. F.Q. Meng*, K. Tsuchiya, Q.S. Mei, B.Z. Jiang, Y. Yokoyama; “Anomalous temperature dependence of crystalline-to-amorphous transformation induced by high-pressure torsion in Zr50(Cu,Al)50”, Materials Transaction, 54 (2013) pp. 1224-1227.
  38. F.Q. Meng, K. Tsuchiya, Y. Yokoyama; “Crystalline to amorphous transformation in Zr-Cu-Al alloys induced by high pressure torsion”; Intermetallics, 37 (2013) 52-58. 
  39. F.Q. Meng, K. Tsuchiya, S. Ii, Y. Yokoyama; "Reversible transition of deformation mode by structural rejuvenation and relaxation in bulk metallic glass", Applied Physics Letter, 101,121914 (2012).
  40. F.Q. Meng*, K. Tsuchiya, F.X. Yin, S. Ii, Y. Yokoyama; “Influence of Al content on martensitic transformation behavior in Zr50Cu50-xAlx”, Journal of Alloys and Compounds, 522 (2012) 136-140. 
  41. F.Q. Meng*, K. Tsuchiya, S. Ii, Y. Yokoyama; “Influence of Ni on stability of martensitic transformation in Zr50Cu50-xNix”, Journal of Alloys and Compounds, 577 (2014) S136-S140. 

合作作者

  1. F Liu, B Jiang, Y Liao, S Lin, Y Chen, F Meng, K Yang, D Sun；Tailoring the deformation modes and mechanical properties of Ti-10Mo alloy through ω phase controlled by quenching rates；Materials Science and Engineering: A, (2025)149014
  2. Jinyang Ni, Jin Li, Heda Bai, Fanqiang Meng, Yuji Huang, Qiulin Li, Xuesong Leng, Xiaoya Wang, Yifan Huang, Xiangli Liu; Study of CrAl coatings fabricated by HiPIMS with enhanced resistance to LBE corrosion; Surface and Coatings Technology; 513 (2025)132476
  3. Chunxue Wang, Guoqiang Huang, Zhenkui Liang, Xin Chen, Jianhui Wu, Tao Sun, Fanqiang Meng, Sergey Mironov, Jicheng Gao, Lin Zhao, Xiaomei Feng, Yifu Shen; Effect of adding IN718 on crack inhibition, microstructure, and mechanical properties of selective laser melted IN738LC alloy; Optical & Laser Technology, 185(2025)112600.
  4. Yongqi Yang, Guoqiang Huang, Bo Li, Fanqiang Meng, Lin Zhao, Xiaomei Feng, Yifu Shen; Effects of molten pool flow on dispersion of reinforcement particles during laser powder bed fusion of TiC/Ti6Al4V composite; Progress in Additive Manufacturing; (2025)
  5. Z.J. Xie, L.Q. Bai, Q. Li, X.J. Sun, J.L. Wang, F.Q. Meng, X.L. Wang, C.J. Shang, Synchrotron X-ray radiation study of retained austenite stability and the effect on fatigue behavior of bainitic railway steels, Materials Science and Engineering A 916(2024)147373.
  6. Xuerui Wei, Zhichao Lv, Yibo Zhang, Jie Dong, Yan Huang, Haibo Ke, Fanqiang Meng, Jinkui Zhao, Baoshuang Shang, Dong Ma, Enhancing the reliabilities of reverse monte carlo simulations of metallic glass structure by imposing strict constraints from partial pair correlation functions, Computational Materials Science, 244(2024)113169.
  7. Yue Gao, Wenlong Xiao , Damon Kent , Junshuai Wang, Wentao Jiang, Fanqiang Meng, Ziling Peng, Yu Fu, Chaoli Ma, Manipulating TWIP/TRIP via oxygen-doping to synergistically enhance strength and ductility of metastable beta titanium alloys, Journal of Materials Science and Technology, 215(2025)58-70.
  8. 孫冬柏, 楊純臻, 孟凡強, 周舟, 倪木一, 崔藝濤, Ulf Karlsson, “4R-4M”試驗方法論在國家重大科技基礎設施實驗裝置設計和建設中的應用與思考; 科學通報，69(2024)2838-2843.
  9. Lei Wang, Meng-Ya LIU, Yang LIU, Xiu SONG, Fan-Qiang MENG; Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloy; Acta Metall Sin; 鎳基高溫合金表面沖擊強化機制及應用研究進; 金屬學報2023, 59(9): 1173-1189. 
  10. Hanzhong Deng, Lei Wang, Yang Liu, Xiu Song, Fanqiang Meng, Teng Yu; Microstructure and tensile properties of IN718 superalloy aged with temperature/stress coupled field; 23 (2023) 4747-4756. 
  11. S. Wang, L. Wang, F. Meng, H. Yu, D. Sun, Quantitative study on Ru local atomic structure in Ni-Al-Ru ternary alloys, Journal of alloys and compounds, 909, (2022)164766.
  12. S. Wang, F. Meng, L. Wang, Y. Yu, D. Sun, The effect of Ru on the evolution of the gamma prime phase in Ni-Al-Ru alloys, Materials, 15(9)(2022)3344.
  13. Hangzhong Deng, Lei Wang, Yang Liu, Xiu Song, Fanqiang Meng, Shuo Huang, The evolution law of delta phase of IN718 superalloy in temperature/stress coupled field, Materials Characterization, 184(2022)111684.
  14. Hunter B Henderson, Joshua A Hammons, Alexander A Baker, Scott K McCall, Tian T Li, Aurélien Perron, Zachary C Sims, Ryan T Ott, Fanqiang Meng, Michael J Thompson, David Weiss, Orlando Rios; Enhanced Thermal Coarsening Resistance in a Nanostructured Aluminum-Cerium Alloy Produced by Additive Manufacturing Materials & Design, Materials and Design, 209 (2021) 109988;
  15. Huan Sheng Lai, Jingyu Guo, Shanglin Zhang, Xiaobin Yu, Fanqiang Meng, Zilong Zhao, Wenzhong Zhou; Effect of Rolling Deformation on Creep Properties of FeCrAl Alloys; Frontiers in Energy Research; 9(2021)305;
  16. GQ Huang, J Wu, WT Hou, LH Shah, ARH Midawi, AP Gerlich, YF Shen, FQ Meng; Microstructural evolution and mechanical behavior of powder metallurgy based SiC/Al–Mg-Sc-Zr nanocomposite subjected to multi-pass friction stir processing; Materials Science and Engineering A, 806(2021)140831;
  17. Guoqiang Huang, Jie Wu, Wentao Hou, Luqman Hakim Ahmad Shah, Abdelbaset R.H. Midawi, Fujun Cao, Adrian Gerlich, Yifu Shen, Fanqiang Meng, A novel two-step method to prepare fine-grained SiC/Al-Mg-Sc-Zr nanocomposite: Processing, microstructure and mechanical properties; Materials Science and Engineering: A, 823, (2021)141764, https://doi.org/10.1016/j.msea.2021.141764.
  18. R. Chaudhary; K. Gandha; F. Meng; E. Simsek; I. Nlebedim; O. Rios; M. Kramer; R. Ott; “Development of MM-Fe-Co-B (MM = mischmetal) Permanent Magnet Alloys via High-throughput Methods”, ACS Combinatorial Science; Accepted 2020 Mar 24.
  19. Hunter B Henderson, David Weiss, Zachary C Sims, Michael J Thompson, Emily E Moore, Aurélien Perron, Fanqiang Meng, Ryan T Ott, Orlando Rios; “Ternary Interactions and Implications for Third Element Alloying Potency in Al–Ce-Based Alloys”；Light Metal 2020;227-232;(會議論文)
  20. Gaoyuan Ouyang, Brandt Jensen, Chad R. Macziewski, Tao Ma, Fanqiang Meng, Qisheng Lin, Lin Zhou, Matthew Kramer, Jun Cui, “Characterization of ordering in Fe-6.5%Si alloy using X-ray, TEM and Magnetic TGA methods”, Materials Characterization, 158(2019)109973.
  21. S.H. Zhou, F.Q. Meng, M.J. Kramer, R.T. Ott, F. Zhang, Z. Ye, S. Jain, R.E. Napolitano, “Metastable intermetallic phases in the Al-Sm system”; Materials Today Communications, 21(2019)100673.
  22. Kai Yao, Xiaohua Min, Satoshi Emura, Fanqiang Meng, Xin Ji, Koichi Tsuchiya, “Enhancement of impact toughness of β-type Ti-Mo alloy by {332}<113> twinning”; Journal of Materials Science;
  23. Ye,F. Meng, F. Zhang, Y. Sun, L. Yang, SH. Zhou, R.E. Napolitano, M.I. Mendelev, R.T. Ott, M.j. Kramer, C-Z. Wang, K-M. Ho; “Observation of h-Al41Sm5 reveals motif-aware structural evolution in Al-Sm alloys”; Scientific Report, （2019）9:6692DOI: 10.1038/s41598-019-43079-9.
  24. Ralph Napolitano, Shihuai Zhou, Xiong Yang, Fanqiang Meng; “Experimental determination of the allotropic transition temperature between tetragonal and orthorhombic Al4Sm metastable phase”; Metallurgical and Materials Transactions A, 50（2019）1130-1136
  25. Lin Zhou, Fanqiang Meng, Shihuai Zhou, Kewei Sun, Taehoon Kim, Ryan Ott, Ralph Napolitano, Matthew J. Kramer; “An Abnormal Meta-stable Nanoscale Eutectic Reaction Revealed by in-situ Observations”; Acta Materialia, 164（2019）697-703.
  26. Lin Yang, Feng Zhang, Fan-Qiang Meng, Lin Zhou, Yang Sun, Xin Zhao, Zhuo Ye, Matthew J Kramer, Cai-Zhuang Wang, Kai-Ming Ho; “Spatially-correlated Site Occupancy in the Nanostoichiometric Meta-stable e-Al60Sm11 Phase during Devitrification of Al-10.2at%Sm Glass”; Acta Materialia 156, 97-103, 2018, 
  27. Eric T. Stromme, Hunter B. Henderson, Zachary C. Sims, Michael S. Kesler, David Weiss, Ryan T. Ott, Fanqiang Meng, Sam Kassoumech, James Evangelista, Gerald Begley, Orlando Rios; “Ageless Aluminum-Cerium-Based Alloys in High-Volume Die Casting for Improved Energy Efficiency”; JOM, 70, 866-871, 2018.
  28. J. Pham, F. Meng, MJ. Lynn, T. Ma, A. Kreyssig, MJ. Kramer, AI. Goldman, GJ. Miller; “From quasicrystals to crystals with interpenetrating icosahedra in Ca-Au-Al: in-situ variable temperature transformation”;Journal of the American Chemical Society; 140(4),1337-1347, 2018.
  29. Z. Ye, F. Zhang, Y. Sun, M.C. Nguyen, M.I. Mendelev, L. Zhou, F. Meng, R.T. Ott, E. Park, M.F. Besser, M.J. Kramer, Z. Ding, C-Z. Wang, K-M. Ho;“Structural hierarchy as a key to complex phase selection in Al-Sm”; Physical Review Materials, 2017,1, 055601 (2017).
  30. Shihuai Zhou, Matthew J. Kramer, Fanqiang Meng, Ryan T. Ott,“Thermodynamic database for the Co-Pr system”,Data in Brief, 6(2016)492-494.
  31. Shihuai Zhou, Matthew J. Kramer, Fanqiang Meng, Ryan T. Ott; “First-principles, experiments and energetic calculations to investigate the hard magnetic phase Materials and Design”,Materials & Design, 90(2016)991-1004.
  32. Naohito Tsuji, Fanqiang Meng, Koichi Tsuchiya, Satofumi Maruyama, Takao Mori; “Effect of nanostructuring and high-pressure torsion process on thermal conductivity of carrier-doped chalcopyrite”, Journal of Electronic Materials, 45(3),1642-1647.
  33. Xiaohua Min, Satoshi Emura, Fanqiang Meng, Guangbao Mi, Koichi Tsuchiya; “Mechanical twinning and dislocation slip multilayered deformation microstructures in b-type Ti-Mo base alloy”; Scripta Materialia, 102(2015)79-82.
  34. Jonas Bünz, Tobias Brink, Koichi Tsuchiya, Fanqiang Meng, Gerhard Wilde, and Karsten Albe, “Low temperature heat capacity of a severely deformed metallic glass”; Physical Review Letter, 112, 135501(2014).
  35. Maho Yamaguchi, Fanqiang Meng, Konstantin Faerstein, Koichi Tsuchiya, Dmitri Golberg “Powder metallurgy routes toward aluminum boron nitride nanotube composites, their morphologies, structures and mechanical properties”; Materials Science and Engineering A, 604 (2014) 9-17. 

 

專利

一種適用于同步輻射原位衍射的無容器氣動懸浮熔煉裝置, 孟凡強，曾龍，于鵬飛，黃國強，夏明許，孫冬柏，申請?zhí)枺?/span>2023234474049。

同步輻射光源XRD-PDF聯用探測器臺架結構； 彭子菱;鄢欣欣;孟凡強;秦宏亮;徐帥;徐進； 專利號：ZL 2023 2 1979523.6。

Ryan T Ott, RIOS Orlando, Zachary C Sims, David Weiss, Michael G Kesler, Fanqiang Meng, Scott K McCall, Hunter B Henderson; Thermo-mechanical Processing Of High-Performance Al-RE Alloys, US Patent 2024/11/5，US12134804.

Aluminum alloys with improved intergranular Corrosion resistance and methods of making and using the same, Orlando Rios, H.H. Hdnerson, D. Wesis, S. McCall, E.T. Stromme, Z.C. Sims, R.T. Ott, F. Meng, M. Kesler, K. Anderson, (US11761061) 2023/09/19.

Ryan T Ott, Fanqiang Meng, Scott K McCall, Hunter B Henderson, Oriando Rios, Zachary C Sims, David Weiss; Al-Ce Alloy Based Composites; US17803924; 2023/7/23.

 

國際會議/講座

“Mechanical properties and microstructure of Al-Mg-Ce alloys prepared by additive manufacturing and hot-extrusion”, LAMM2023, Xiamen, China, (Keynote Speaker)

“Structures and Dynamics in Ni-Nb System via Combinatorial and high-throughput Methods”, TMS2018,  3/11/2018-3/15/2018, Phoenix, AZ, USA; (邀請報告);

“Crystallization Pathways in Al-Sm alloys Prepared by Melt-Spinning and Magnetron Sputtering”; TMS2017, 2/26/2017-3/2/2017, San Diego, CA, USA;

“Processing Dependent Phase Selection in Al90Sm10 Amorphous Alloys”, Bulk Metallic Glasses Conference XI.  6/6/2016-6/9/2016, St. Louis, MO, USA

“Fabrication of amorphous-nanocrystalline Zr50Cu50-xAlx by high-pressure torsion”, International Workshop on Bulk Nanostructured Metals,2012/06/26 – 2012/06/29, Kyoto University, Kyoto, Japan，優秀海報

“Effect of high-pressure torsion on deformation modes in bulk metallic glass”, NIMS Conference, 2012/06/04-2012/06/06, Tsukuba, Japan

“Influence of Ni on stability of martensitic transformation in Zr50Cu50-xNix” International Conference on Martensitic Transformation (ICOMAT2011), 2011/09/04 – 2011/09/09, Osaka, Japan

“Microstructure Evolution of Crystallized Zr-Cu-Al Metallic Glass by High Pressure Torsion”, International Symposium on Giant Straining Process for Advanced Materials (GSAM2010), 2010/11/19 - 2010/11/22, Kyushu University, Fukuoka, Japan 優秀海報