banner

蔣季伸副教授

電子郵箱：jiangjsh3@mail.sysu.edu.cn

研究領域：先進耐事故燃料包殼涂層高溫強度及失效機理；高溫材料本構模型及數理建模；微納尺度力學原位測試技術；高溫材料與結構強度、疲勞、蠕變及斷裂。

一、基本信息

蔣季伸，副教授（碩士生導師）

郵箱：jiangjsh3@mail.sysu.edu.cn

學科方向：核材料與力學

研究領域：

先進耐事故燃料包殼涂層高溫強度及失效機理；

高溫材料本構模型及數理建模；

微納尺度力學原位測試技術；

高溫材料與結構強度、疲勞、蠕變及斷裂。

 

二、教育背景

2013/09~2019/03 上海交通大學，機械與動力工程學院，動力工程及工程熱物理，工學博士；

2009/09~2013/06 大連理工大學，能源與動力工程學院，熱能與動力工程，工學學士。

 

三、工作經歷

2022/04~至今中山大學，中法核工程與技術學院，百人計劃副教授；

2019/03~2022/03 中山大學，中法核工程與技術學院，博士后。

 

四、科研項目

  1. 國家自然科學基金青年項目，氣膜冷卻孔自由邊效應對熱障涂層界面開裂影響機制研究，在研，主持。
  2. 國家自然科學基金聯合基金重點項目，涂層鋯合金的高溫力學性能與失效機理研究，在研，子課題主持。
  3. 廣東省自然科學基金面上項目，組織調控對耐事故Cr涂層高溫力學性能及失效行為的影響研究，在研，主持。
  4. 動力機械與工程教育部重點實驗室，摻氫燃?xì)廨啓C(jī)燃燒室壁面多孔氣膜冷卻的流/熱/固耦合特性及機理研究，在研，主持。
  5. 中國博士后基金站前特別資助項目（首批），高溫氧化對核燃料包殼ATF涂層力學失效機理影響的研究，結題，主持。
  6. 中國博士后基金面上項目，熱循環載荷下冷卻孔結構對熱障涂層界面失效影響的研究，結題，主持。
  7. 中廣核研究院有限公司委托項目，ATF燃料棒束失水后及再淹沒階段特性研究實驗采購，190萬元，在研，主持。
  8. 高校基本科研業務費-青年教師培育項目，高溫拉伸載荷下ATF涂層的表/界面裂紋競爭機制研究，結題，主持。
  9. 廣東省基礎與應用基礎研究重大科技專項，基于材料基因工程的先進能源裝備材料服役性能評價技術及其應用研究，在研，子課題第二參與人。
  10. 中央軍委裝備發展部項目裝備預先研究項目，**的變形失效機理與力學性能原位研究，結題，第一參與人。

 

五、學術論文

[1]   Jiang J, Ma X, Wang B. Positive or negative role of preoxidation in the crack arresting of Cr coating for accident tolerant fuel cladding[J]. Corrosion Science, 2021, 193: 109870.

[2]   Jiang J, Du M, Pan Z, et al. Effects of oxidation and inter-diffusion on the fracture mechanisms of Cr-coated Zry-4 alloys: An in situ three-point bending study[J]. Materials & Design, 2021, 212: 110168.

[3]   Jiang J, Du M, Ma X. On the microstructures and cracking modes of Cr-coated Zr-4 alloys oxidized and vacuum-annealed at 1000° C[J]. Journal of Alloys and Compounds, 2022, 908: 164610.

[4]   Jiang J, Zhai H, Du M, et al. Temperature-dependent deformation and cracking behavior in Cr coating for accident tolerant fuel cladding: An in situ SEM study[J]. Surface and Coatings Technology, 2021, 427: 127815.

[5]   Jiang J, Yuan M, Du M, et al. On the crack propagation and fracture properties of Cr-coated Zr-4 alloys for accident-tolerant fuel cladding: In situ three-point bending test and cohesive zone modeling[J]. Surface and Coatings Technology, 2021, 427: 127810.

[6]   Jiang J S, Wang D Q, Du M Y, et al. Interdiffusion behavior between Cr and Zr and its effect on the microcracking behavior in the Cr-coated Zr-4 alloy[J]. Nuclear Science and Techniques, 2021, 32(12): 1-12.

[7]    X.F. Ma, H.L. Zhai, F.Q. Meng, J.S. Jiang*, et al. Benefit or harm of accident tolerant coatings on the low-cycle fatigue properties of Zr-4 cladding alloy- in-situ studies at 400°C. J. Nucl. Mater., 2021, 545:152651.

[8]   J.S. Jiang, D.K. Zhan, J.N. Lv, et al. Comparative study on the tensile cracking behavior of CrN and Cr coatings for accident-tolerant fuel claddings. Surf. Coat. Tech., 2021, 409:126812.

[9]    X.F. Ma, W.J. Zhang, Z.J. Chen, D.Yang, J.S. Jiang*, et al. Elastoplastic Deformation and Fracture Behavior of Cr-Coated Zr-4 Alloys for Accident Tolerant Fuel Claddings. Front. Energy Res., 2021, 9:655176.

[10]J.S. Jiang, L. Zuo, X.F. Ma*, et al. In-situ study on the tensile behavior of Cr-coated zircaloy for accident tolerant fuel claddings. Surf. Coat. Tech., 2020, 394: 125747.

[11] X.F. Ma, H.L. Zhai, J.S. Jiang*, et al. Fatigue short crack propagation behavior of selective laser melted Inconel 718 alloy by in-situ SEM study Influence of orientation and temperature. Int. J. Fatigue, 2020, 139:105739.

[12]J.S. Jiang, D. Wu, W.Z. Wang, et al. Fracture behavior of TBCs with cooling hole structure under cyclic thermal loadings. Ceram. Int., 2020, 46(3): 3644-3654.

[13]J.S. Jiang, X.F. Ma*, B. Wang. Stress analysis of the thermal barrier coating system near a cooling hole considering the free-edge effect. Ceram. Int., 2020, 46(1): 331-342.

[14]J.S. Jiang, L.X. Jiang, W.Z. Wang*, et al. Numerical stress analysis of the TBC-film cooling system under operating conditions considering the effects of thermal gradient and TGO growth. Surf. Coat. Tech., 2019, 357: 433-444.

[15]J.S. Jiang, W.Z. Wang*, X.F. Zhao, et al. Numerical analyses of the residual stress and top coat cracking behavior in thermal barrier coatings under cyclic thermal loading. Eng. Fract. Mech., 2018, 196: 191-205.

[16]J.S. Jiang, Z.H. Zou, W.Z. Wang*, et al. Effect of internal oxidation on the interfacial morphology and residual stress in air plasma sprayed thermal barrier coatings. Surf. Coat. Tech., 2018, 334: 215-226.

[17]J.S. Jiang, B.Q. Xu, W.Z. Wang*, et al. Finite element analysis of the effects of thermally grown oxide thickness and interface asperity on the cracking behavior between the thermally grown oxide and the bond coat. J. Eng. Gas Turb. Power, 2017, 139(2): 022504.

[18]J.S. Jiang, W.Z. Wang*, N.L. Zhao, et al. Application of a creep-damage constitutive model for the rotor of a 1000 MW ultrasupercritical steam turbine. J. Eng. Gas Turb. Power, 2016, 138(2): 022606.

[19]J.S. Jiang, J.D. Yang, L. Xiao, et al. Numerical analysis of the impact effect of foreign bodies on a steam strainer in a steam turbine valve. J. Mech. Sci. Tech., 2018, 32(1): 405-413.

[20]J.S. Jiang, Z.W. Cai, W.Z. Wang*, et al. Finite element analysis of thermal-mechanical behavior in the thermal barrier coatings with cooling hole structure. ASME Turbo Expo, 2017, V006T24A011.

[21] Jin D, Jiang J, Di Z, et al. Effect of interface undulation on the high temperature oxidation behaviors of grit-blasted and coated zircaloy in pressurized water[J]. Corrosion Science, 2021, 192: 109839.

[22] C. Lin, J.S. Jiang, H. Ruan, et al. Investigation of non-uniform oxidation based on a mechanochemical phase field model with nonlinear reaction kinetics and large inelastic deformation. npj Materials Degradation, 2023, 7.

[23] H. Zhai, J.S. Jiang, W. Zhang, et al. Microstructure sensitivity of the low cycle fatigue crack initiation mechanisms for the Al0.3CoCrFeNi high entropy alloy: in-situ SEM study and crystal plasticity simulation, Int. J. Fatigue, 2023, 107871.

[24] H. Zhai, W. Zhang, J.S. Jiang, et al. Microstructure relevant fatigue short crack propagation behavior of Al0.3CoCrFeNi high entropy alloy: in-situ SEM study, Int. J. Fatigue, 2023, 107869.

[25] Z.W. Cai, J.S. Jiang, W.Z. Wang*, et al. CMAS penetration-induced cracking behavior in the ceramic top coat of APS TBCs. Ceram. Int., 2019, 45(11): 14366-14375.

[26] X.F. Ma*, J.S. Jiang, W.J. Zhang, et al. Effect of Local Recrystallized Grains on the Low Cycle Fatigue Behavior of a Nickel-Based Single Crystal Superalloy. Crystals, 2019, 9(6): 312.

[27] Z. pan, M. Yuan, J.S. Jiang*, et al. On the tensile fracture behavior of Cr coating for ATF cladding considering the effect of pre-oxidation. ICCEAM, 2021.

[28] M. Yuan, Z. Pan, J.S. Jiang*, et al. Numerical modeling of cracking behavior in Cr coating for ATF cladding under three-point bending. ICCEAM, 2021.

[29] Du M, Wang C, Jiang J*, et al. Three-point bending study on the microscopic fracture behavior of pre-oxidized Cr-coated Zr-4 alloys[C]//Journal of Physics: Conference Series. IOP Publishing, 2021, 2076(1): 012051.

[30] Zhai H, Zhang S, Yang D, Jiang J*, et al. Effect of heat treatment on the microstructure and hardness of Al0. 3CoCrFeNi high entropy alloy[C]//Journal of Physics: Conference Series. IOP Publishing, 2021, 2076(1): 012085.

[31] Hao Yang, J.S. Jiang, Z.Z. Wang, et al. Fatigue Fracture Mechanism of a Nickel-Based Single Crystal Superalloy with Partially Recrystallized Grains at 550 °C by In Situ SEM Studies. Metals, 2020, 10:1007.

[32] B.Q. Xu, J.S. Jiang, X.F. Zhao*, et al. Time-dependent spalling behavior of thermally grown oxide induced by room temperature interfacial deformation. Surf. Coat. Tech, 2018, 334: 164-172.

[33] L. Song, B. Huang, J. Li, X. Ma, M. Liu, J.S. Jiang, Y.Y. Hu. Effects of ion irradiation on Cr, CrN, and TiAlCrN coated Zircaloy-4 for accident tolerant fuel claddings. Ann. Nucl. Energy, 2021, 156:108206.

[34] Z.G. Zheng, Y.B. Peng, J.S. Jiang, et al. In-situ study of the fracture behavior of SiCf-SiC composite material under three-point bending. IOP Conf. Series: Earth and Environmental Science, 2021, 639:012020.

[35] N.L. Zhao, W.Z. Wang*, J.S. Jiang, et al. Study of creep-fatigue behavior in a 1000 MW rotor using a phenomenological lifetime model. J. Mech. Sci. Tech., 2017, 31(2): 605-614.

[36] R.A. Adjei, W.Z. Wang*, J.S. Jiang, et al. Numerical investigation of unsteady shock wave motion in a transonic centrifugal compressor. ASME Turbo Expo, 2017, V008T26A012.

[37] 蔣凌欣, 蔣季伸, 王煒哲*. 體積輻射換熱對熱障涂層-氣膜冷卻系統中熱障涂層溫度場的影響. 動力工程學報, 2019, 06:441-446.

 

六、指導和培養學生

  1. 2018級本科畢設（張蓉，韓丹丹，溫俊如，高建洲），獲大學生創新訓練計劃國家級項目，獲個人優秀畢業論文。
  2. 2017級本科畢設（潘子彥，袁銘鐸，鄒鎮宇，張偉健），獲大學生創新訓練計劃校級項目，獲個人優秀畢業論文，優秀團隊論文，優秀畢業設計海報。
  3. 2016級本科畢設（盧凌風，梅漢青，涂家駿），獲大學生創新訓練計劃國家級項目。